Passive protection of critical sites against drones
AERO-SHIELD
A two-layer steel net screen, designed to stop a one-way attack drone at a distance from the protected asset. Galvanised steel, no power, made in the EU. Qualification planned for Q3 2028.
What it does
Stops the drone before the asset
AERO-SHIELD is mounted in front of, or above, the part of a site that must keep working: a transformer, a tank, a control building. The outer layer, a ring or rope net, is designed to absorb the drone's impact energy. The inner layer, a fine steel mesh, catches the debris. A damaged panel is replaced on its own; the site stays in operation.
Used at: electrical substations and transformers · fuel and gas tanks · power and CHP plants · ammunition and materiel depots · water treatment and pumping stations · communications sites.
Key characteristics
Protection by construction alone
The screen works around the clock and needs no staff. Design values until qualification is complete; site-specific calculation under NDA.
Construction
Mounting
Qualification
Two layers: a ring or rope net absorbs the impact energy, a steel mesh catches drone debris. Zinc-coated steel wire and rope. Passive: no power, sensors or operators.
Frameless on existing structures, or on WarTex Defense steel frames. Panels and rolls sized to the site. A damaged panel is replaced on its own. Made in the Czech Republic.
Impact trials with BAAINBw at WTD 52, planned for Q3 2028. Designed to EN 10244-2, EN 12385 and EN 1090-2 (EXC2); corrosion tests to ISO 9227. AQAP 2110 targeted for April 2028.
Next step
Export control
Tell us about your site
Tell us the site type and the area to protect. We will send a protection layout and a commercial offer.
Products may be subject to export control under EU and national law. Availability, delivery and the release of technical information depend on licences issued by the competent authorities.